SKU: 13114138272

RacePak IQ3 Street Dash Kit w/ Oil Pressure Sensor & Fluid Temperature Sensors

$629.98 $699.98
Save 10%
No.2 Bestseller on www.maison-nature-brenne.fr >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

RacePak IQ3 Street Dash Kit w/ Oil Pressure Sensor & Fluid Temperature SensorsOverview: Street Instrumentation Has Never Been Easier! Racepak combines high performance digital instrumentation with the indicators and warnings of a street dash into a compact and versatile product. Based on a rugged, race proven design, the IQ3S street dash offers the easy to install convenience of a single unit, while capable of interfacing with over 20 aftermarket EFI systems, OBD2 or up to 32 standalone remote sensors. Instrumenting your street

Overview:

Street Instrumentation Has Never Been Easier! Racepak combines high-performance digital instrumentation with the indicators and warnings of a street dash into a compact and versatile product. Based on a rugged, race-proven design, the IQ3S street dash offers the easy to install convenience of a single unit, while capable of interfacing with over 20 aftermarket EFI systems, OBD2 or up to 32 standalone remote sensors. Instrumenting your street vehicle has never been easier. Racepak's IQ3S street dash solves all your high performance street instrumentation needs. Whether your latest project car is a late model engine swap, after market EFI equipped or traditional carburetor and distributor, the IQ3S street dash offers the easiest and most compact method to add late model digital instrumentation with the required street legal indicators, to your vehicle. If you are looking to monitor additional information, Racepak's complete line of high performance motorsports style sensors can be easily connected to the rear of the IQ3S street dash, via Racepak's revolutionary plug and play, single cable V-Net sensors. Compatible With 20+ EFI Systems Easily stream and display information from over 20 aftermarket EFI units, to the IQ3S street dash via the optional EFI harness, while the included PC programming cable allows for complete display customization. OBD2 Equipped Engines Displaying information from 2008 and later OBD2 engines is a snap, with Racepak's optional OBD2 harness. Customize the IQ3S street dash with your choice of OBD2 information, utilizing a laptop and included programming cable. Carbureted Engines Standard ignition and carbureted engines can display data through the use of one pressure and two temp sensors included with the IQ3S street dash. Additional sensors available from Racepak.

Features:

  • Turn, High Beam, Park Indictors
  • Odometer, Speedometer Fuel Level
  • Oil Pressure
  • Coolant Temperature
  • Transmission Temperature
  • Optional GPS Speed Inputs
  • Internal input for OBD2 - 2008 later
  • Fully User Programmable
  • Four Display Screens
  • Replaces Up To 24 Gauges
  • Single Cable External Sensor Input
  • Internal input for over 20 Aftermarket
  • EFI systems

Application:

Year Make Model Submodel Engine Size
Universal

Specs:

Application Street
Brand Racepak
Emission Code 5
Model 250-DS-IQ3S
Product Type Digital Dash
Warning California Proposition 65
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13114138272

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 285 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
Brendon MO
Port Orchard, US
★★★★★ 5
K and N is the best
Size: CA12290-Premium
In my opinion, you can’t buy a better air filter. Been buying them for all my cars since the 1990s.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2024
S
Verified Purchase
Steve
Lake Worth, US
★★★★★ 2
Does not fit 2023 Honda Accord as it says in the title
Size: CA12290-Premium, Size: CA12290-Premium
Does not fit 2023 Honda Accord as it says in the title. Seems like good quality otherwise.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 3, 2024
P
Verified Purchase
Philip and Lucy
Carnegie, US
★★★★★ 5
Fits Toyota 2010 FJ cruiser
Perfect fit for a Toyota 2010 FJ cruiser. Install might have been the easiest cabin filter I've done in any car that new. Remove glove box, pull out the cover and replace it. Fits great and takes odors out from it sitting for 6 months in the driveway. No notice to less airflow when on any level of fan speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
S
Verified Purchase
S
Grantham, US
★★★★★ 5
Comparison with POTAUTO filter: Very similar but cheaper
I bought a POTAUTO MAP 1033C and EPAuto CP846 cabin air filter to compare them for use in my 09 Legacy (gen 4). They both seemed comparable and are cheaper than most other, similar filters, though the POTAUTO was and still is ~33% more expensive than the EPAuto. Both seem built well-enough, considering they're only being used as relatively low-flow cabin filters. That said, the EPAuto is slightly better, mainly due to the white trim piece being unattached along one side on the bottom of the POTAUTO filter. Almost certainly nothing that will affect its performance or longevity, but it is interesting considering it's the more expensive of the two. However, it must be kept in mind that this is an incredibly small sample size. In one of my very scientific tests (/s), I held them up side by side and looked through them toward the sun (obviously being careful) to judge thickness/density and uniformity. Neither had any thin spots that I noticed, and they were pretty similar overall. One of them blocked slightly more light than the other, indicating more filtration, but I unfortunately don't remember which one. I feel like it was the EPAuto, but I don't really want to speculate as I could very well be wrong. What I do remember is that the difference was so minor that all else being equal, it wouldn't justify the cost difference between the two. In other words, even if the POTAUTO were the slightly better one, it wouldn't be worth the extra few dollars for the minimal amount of extra filtration. In another test, I compared the filters to each other and the old filter (which I'm pretty sure was OEM, but certainly not a charcoal filter, so it was significantly thinner) by blowing air from a compressor through them. I held the nozzle at roughly the same distance from each on one side of the filters, and I held my other hand at roughly the same distance from each on the other side. The old filter, unsurprisingly, let much more air flow through. Both charcoal filters were much more restrictive due to their extra thickness, leading me to feel much less air coming through. Both were roughly the same. Both filters also held up just fine to the strong blasts of air. I bought a couple other filters that I was going to cut to fit to use one or both with these filters as a pre-filter and/or additional charcoal layer. After the airflow test, I decided against this, as these are a lot more restrictive than OEM already, and I didn't want to push it, since that could at best cause issues with getting good airflow into the car, and at worst could damage the blower. If not for the fact many, many people have been using these and similar filters for a long time without apparent issue caused by this, I would hesitate to even use these. I haven't noticed a decrease in the airflow, but it's doubtful I would since I rarely turn the fan up past the first couple settings (usually have it on the first) if I have it running at all, and I have the center vents pulled out (to access the inside of the dash) which causes the flow at the vents to be reduced slightly. TL;DR - Both the POTAUTO and EPAuto charcoal filters appear to be a good choice, with the EPAuto having a slight edge on build quality (based on my limited sample size of one each) and a cheaper price. Filtration appears to be very similar between the two, certainly not enough of a difference to warrant the extra price for the POTAUTO over the EPAuto. Flow is significantly more restrictive than OEM filter but doesn't appear to be an issue. I give the EPAuto 5 stars and the POTAUTO 4 stars, only because the value of the POTAUTO is a good bit less (very similar or possibly even inferior quality for 33% more money). I can't speak to their longevity or performance, but I don't imagine either should prove to be an issue. -------------------------------------------------- As a side note relating specifically to the Legacy: replacing the cabin filter in this car is a PITA. It's not overly difficult per se, but a serious pain and certainly not something you're going to do when you have a spare few minutes. I'd rate it probably around a 3.5/10 in difficulty and a 7/10 for annoyance. While you can sort of access it by removing the manual compartment, you can't remove the tray through that. So you need to actually take the whole glove box out, which requires removing the side panel, unhooking the string/loop that keeps it from falling all the way down, and removing a few plastic screws, which can be a bit of a pain (and apparently Subaru loves them since they're all over the car). A stubby Philips driver will be helpful. Once you have the glove box out of the way, you have to unscrew several more of those plastic screws to remove the plastic cover between the glove box and the filter. This hole is where you gain access. Be careful when removing the old filter as loose dirt and debris may fall out and make a bit of a mess. You don't really want to get any in the fan below it if you can help it. Reverse the steps to reassemble it, and remember to reattach the string. Getting the glove box back in its track can be a bit of a challenge; in my experience from doing it multiple times I've found you sort of half force it and half don't. That is, it'll likely offer some resistance even if it's lined up, so if you try to baby it you'll probably be there a while, but also play with the alignment a bit to see if you can get it without marring up the tab and the slot on the right side too much. All in all, expect to spend anywhere from 15-45 minutes on this, and make sure you have a standard length as well as a shorter or stubby Philips screwdriver. I have to say, when it comes to air filters, this car is horrible. The air intake filter is a pain to change, too--much worse than most if not all other cars I've done. -------------------------------------------------- Keywords: Subaru Legacy, fourth gen, fourth generation, 4th gen, 4th generation, 03, 04, 05, 06, 07, 08, 09, 2003, 2004, 2005, 2006, 2007, 2008, 2009
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 29, 2017
R
Verified Purchase
R
Carnegie, US
★★★★★ 5
Good price on the part and 5 min install saved me $35
Fit fine in my 4th gen 4Runner took 5mins to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026

recommand products

N218756: Press Wheel Ring
157.00
N282417: Strap
64.39
N377348: Brake Hub Spacer
53.70
N404366: Cooler Reinforcement Bracket
164.02
N221405: Sensor Angle
35.55