TracTuff Remote Mount Fluid Manifold w/ Mounting Bracket

TracTuff Remote Mount Fluid Manifold w/ Mounting BracketFeatures: Mounting Bracket (4) 1 8NPT Ports The Remote Mount Fluid Manifold gets your critical sensors off of the engine! Lets face it, the factory oil pressure sending port was never meant to support the weight of the OEM sender, your after market gauge pressure sender, your after market gauge temp sender, and your turbo oil feed! Vibration can cause some pretty serious problems and an oil fire is not something you want to deal with; not to mention

Features:

-Mounting Bracket
-(4) 1/8NPT Ports 

The Remote Mount Fluid Manifold gets your critical sensors off of the engine! Lets face it, the factory oil pressure sending port was never meant to support the weight of the OEM sender, your after market gauge pressure sender, your after market gauge temp sender, and your turbo oil feed! Vibration can cause some pretty serious problems and an oil fire is not something you want to deal with; not to mention... it has been known to not only knock out sensors prematurely but also cause block damage, so why not get them off the block.

The back-side of the block is 3D machined for a PERFECT fit against a 1.00" diameter aluminum tube (I have also used them on 2.00" tube) and the caps have a small undercut so they sit inside the tube when welding. Just choose the combo you want. The K MAP port has an associated M5 x 1.0 screw hole to hold the sensor in place.

NOTE: Please contact [email protected] for your specific mounting bracket needs; the bracket shown is just an example. If a bracket is chosen and I am not contacted about specific needs... the bracket pictured will be duplicated and welded in the same position. If you are looking to get oil to this product, take a look at both the aluminum and stainless steel BSPT adapters!