Apollo 1 in. x 100 ft. Red PEX-A Pipe, Solid Coil1 in. x 100 ft. Red PEX A Expansion Pipe Durable, flexible PEX A pipe for potable hot water distribution. The 1 in. red solid coil resists corrosion and recoiling, delivers full flow performance, and works with expansion, crimp, clamp, or sleeve fittings. Key Features: Flexible PEX A construction: Easy routing with fewer joints to minimize leak points Full flow design: 1 in. nominal diameter supports high water output Heat repairable kinks: Can be

1 in. x 100 ft. Red PEX-A Expansion Pipe

Durable, flexible PEX-A pipe for potable hot water distribution. The 1 in. red solid coil resists corrosion and recoiling, delivers full-flow performance, and works with expansion, crimp, clamp, or sleeve fittings.

---

Key Features:

• Flexible PEX-A construction: Easy routing with fewer joints to minimize leak points
• Full-flow design: 1 in. nominal diameter supports high water output
• Heat-repairable kinks: Can be corrected during install to avoid extra connections
• Broad fitting compatibility: Works with expansion, crimp, clamp/sleeve, and push-to-connect systems
• High durability: Corrosion-resistant, ductile tubing rated up to 200°F and 160 psi

Please check the Product Data Sheet Here

---

Specifications Table:

Specification	Details
Application	Potable Water
Color Family	Red
Color/Finish	Red
Connectivity	Barb
Material	Cross-Linked Polyethylene (PEX)
Maximum Flow Rate (gallons per minute)	3.8
Maximum Working Temperature (F)	200
Maximum Working Pressure (psi)	160
Minimum Working Temperature (F)	-40
PEX Type	A
Pack Size	1
Pipe Features	Corrosion Resistant, Ductile, Flexible
Pipe or Fitting Product Type	Pipe & Tubing
Product Weight (lb.)	17.2
Actual Inside Diameter (in.)	0.862
Actual Outside Diameter (in.)	1.125
Nominal Inside Pipe Diameter (in.)	1
Pipe Wall Thickness (in.)	0.1315
Product Length (ft.)	100
Certifications and Listings	ANSI Compliant, ASTM Compliant, CSA Listed, NSF Listed
Manufacturer Warranty	25 Years: For exclusive use with ASTM F1960 fittings
Pressure/Temperature Ratings	160 psi @ 73.4°F, 100 psi @ 180°F, 80 psi @ 200°F
System Compatibility	Compatible with Uponor and Wirsbo systems; Tectite push-to-connect fittings
Installation Environments	May be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, under wood flooring, or behind wallboard/plaster

---

Frequently Asked Questions (FAQ):

Q: What fittings are compatible?
A: Compatible with ASTM F1960 expansion fittings, crimp, clamp/sleeve methods, and Tectite push-to-connect.

---

Q: Is this pipe safe for potable water?
A: Yes—PEX-A tubing is certified for potable water and meets or exceeds ASTM F876, F877 and related standards.

---

Q: Can it be used for hot water lines?
A: Yes, the red color identifies hot water; it is rated 160 psi at 73.4°F, 100 psi at 180°F, and 80 psi at 200°F.

---

Q: Where can it be installed?
A: Suitable for installation in concrete, lightweight gypsum, sand, asphalt, under wood flooring, or behind wallboard/plaster.

---

Q: Does the coil have strong memory?
A: Apollo PEX-A has reduced coil memory compared to regular PEX, helping it lay flat and resist recoiling.

---

Sculptural Utility with a Bold Red Statement

This vivid red PEX-A coil brings a modern sensibility to the unseen architecture of water. Its supple, resilient form glides through frameworks, minimizing joints while maximizing flow. Pair it with sleek brass expansion fittings for a refined, cohesive system. It’s a quiet luxury—performance-driven infrastructure that elevates everyday living.

---

Upgrade your plumbing with flexible, full-flow Apollo PEX-A—add this 100 ft. coil to your project today.

Warranty

Installation