4-Piece Damascus Fire Pattern Chef Knife Set with Black Resin Handles
SKU: 37683899305

4-Piece Damascus Fire Pattern Chef Knife Set with Black Resin Handles

Sale price$121.05 Regular price$134.50
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

4-Piece Damascus Fire Pattern Chef Knife Set with Black Resin HandlesThis Damascus Fire Pattern Chef Knife Set has four knives and a leather roll. The largest is a 10 inch cleaver. The set also has a 9 inch chef knife, an 8 inch santoku knife, and a 7 inch utility knife. Every blade is forged from Damascus steel with a bold fire and ladder flow pattern in a raw natural finish. Each handle is solid black resin. A brass bolster sits at the blade end. Two brass pins lock the scales on each handle. A full tang runs through

This Damascus Fire Pattern Chef Knife Set has four knives and a leather roll. The largest is a 10-inch cleaver. The set also has a 9-inch chef knife, an 8-inch santoku knife, and a 7-inch utility knife. Every blade is forged from Damascus steel with a bold fire and ladder flow pattern in a raw natural finish. Each handle is solid black resin. A brass bolster sits at the blade end. Two brass pins lock the scales on each handle. A full tang runs through every piece. A brown leather roll with tan straps and brass buckles holds all four knives in separate slots.

This is the only Damascus Fire Pattern Chef Knife Set at JW Steel Crafts with four fire Damascus blades, black resin handles, brass bolsters, brass pins, and a leather roll across a full 10 to 7-inch size range.

The History Behind This Blade

Fire pattern Damascus steel gets its distinctive flowing pattern from the controlled manipulation of layered steel billets during forging — heat, hammer angle, and twist combine to produce the bold flame-like grain visible across each blade face. Damascus kitchen knives entered professional kitchens for their layered grain structure that holds a sharp working edge through varied daily cutting demands. Black resin with brass bolsters became a favored handle combination on artisan knife sets for its bold contrast between dark grip and gold-tone metal. The JW Steel Crafts fire pattern set carries that artisan forging tradition across all four kitchen blades.

Blade Performance

Every blade is forged from Damascus steel with a bold fire and ladder flow pattern. The raw natural finish keeps the full forged grain texture visible on every face. The 10-inch cleaver handles heavy chopping and dense meat and vegetable work. The 9-inch chef knife covers primary slicing, dicing, and general food prep. The 8-inch santoku knife handles vegetable prep and precise ingredient cuts with its flat, wide profile. The 7-inch utility knife manages trimming and mid-size cutting tasks. All four blades hold a sharp edge through daily kitchen use.

Handle Construction

Every handle is solid black resin with a smooth matte finish. Resin is fully moisture-resistant through heavy daily kitchen use without warping or cracking. A brass bolster sits at the blade end of every knife. Brass adds front balance, resists corrosion, and creates bold contrast against the black resin and fire Damascus blade. Two brass pins lock the scales firmly to the full tang on each handle. The full tang runs the full length on every piece. The brown leather roll with tan straps and brass buckles holds all four knives in separate slots for safe storage and transport.

Best Used For

  • Heavy chopping, slicing, vegetable prep, and trimming tasks

  • Home kitchens wanting a compact complete Damascus knife set

  • Professional chefs needing core blade profiles in one matched set

  • Collectors of fire pattern Damascus and artisan kitchen knives

  • Gifting for chefs, home cooks, and Damascus knife enthusiasts

Specifications

Feature

Details

Set Pieces

4 knives + leather roll

Blade Material

Damascus steel

Blade Finish

Fire and ladder flow pattern, raw natural finish

Knife 1

10-inch cleaver

Knife 2

9-inch chef knife

Knife 3

8-inch santoku knife

Knife 4

7-inch utility knife

Handle Material

Black resin

Bolster

Brass bolster on all pieces

Pin Detail

Two brass pins on all pieces

Tang

Full tang on all pieces

Storage

Brown leather roll with tan straps and brass buckles

Type

Chef knife set

Frequently Asked Questions

What is fire pattern Damascus steel?
A bold flame-like grain formed during forging by controlling heat, hammer angle, and twist across layered steel billets.

What knives are included in this set?
10-inch cleaver, 9-inch chef knife, 8-inch santoku knife, and 7-inch utility knife — four pieces total.

What do the brass pins do on each handle?
Two brass pins lock the black resin scales firmly to the full tang on each knife.

Does the leather roll hold all four knives?
Yes. Four separate slots with tan straps and brass buckles keep blades apart during storage and transport.

Are black resin handles moisture-resistant?
Yes. Resin is fully waterproof through heavy daily kitchen use without warping or cracking.

Is this set suitable as a gift?
Yes. Four fire Damascus blades with black resin handles and brass bolsters make a strong gift for chefs and collectors.

How do I care for this set?
 Hand wash and dry after each use. Apply light oil to blades occasionally. Store in the leather roll in a dry place.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 37683899305

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 767 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Y
Verified Purchase
YAAU
Phoenix, US
★★★★★ 4
Pretty good product
Style: Single Arm, Size: 13"-34"
Assembly of the actual stand is easy, mounting to a monitor is not because of industrial design fluff. Gotta make the side you DON'T see look "sleek" and "smooth" and "organic" and "integrated" because...reasons. While this is on the manufacturer(s) of the monitor itself, what semi-modern monitor uses 100x100 VESA anyway? The included long screws are too long. Even using the plastic spacers they'll bottom out with a 2mm gap; add washers and it's a lever arm and not solid or confidence-inspiring. I used a die grinder to remove the excess material closer to 75x75 and used the included short screws, perfect. So either include 25mm screws instead of the 30mm (but then the spacers would be too long), or just update the mount plate to 75x75 only, and throw 100x100 "compatibility" into the dustbin of history where absolutely no one will miss it. Arm does move/adjust smoothly and is holding a 34" widescreen where I left it 2 days ago, so it IS a great product once it's properly fitted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026
E
Verified Purchase
Ellie
Charlottesville, US
★★★★★ 5
Great monitor arm stand.
Style: Single Arm, Size: 13"-34"
Very happy with this product. It's sturdy and easy to install. Love the tilt and swivel feature. The fittings for the stand are very well made. I suggest this for the quality and the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
T
Verified Purchase
TooMuchStuff
Birmingham, US
★★★★★ 5
Easy to set up & works great
Style: Single Arm, Size: 13"-34"
It was super easy to get set up, came with all the hardware ypu need to install multiple ways. Holds my monitor securely and is still easy to move around. The adjustments are easy to access and have plenty of variation. Great purchase, such a reasonable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
M
Verified Purchase
Mike
Dallas, US
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console. The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
E
Verified Purchase
Ezra
Belleville, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024

recommand products