BNR 2013-2018 Ford Focus BNR ST71 V2 550HPThe BNR ST71 turbocharger upgrade is intended for cars with auxiliary fuel systems! This turbo is good for up to around 500 WHP. This upgrade takes a little longer to spool over the ST67 (300 RPM) but nets around 100 more peak HP when maxed out. If you anticipate aux fuel system and or a forged internal engine this turbo would be the best option! This is what you get when you purchase the ST71! BNR g30 660 Center Housing Rotating Assembly (VSR

The BNR ST71 turbocharger upgrade is intended for cars with auxiliary fuel systems!  This turbo is good for up to around 500 WHP. This upgrade takes a little longer to spool over the ST67 (300 RPM) but nets around 100 more peak HP when maxed out.  If you anticipate aux fuel system and/or a forged internal engine this turbo would be the best option!

This is what you get when you purchase the ST71!

• BNR g30-660 Center Housing Rotating Assembly (VSR balanced)
• BNR T04B Compressor housing with a 2 bolt inlet (.60 a/r)
• BNR 10cm (.72 a/r) exhaust housing
• 30mm Internal wastegate with heavy duty swing valve assembly
• Adjustable internal wastegate with stainless mounting bracket (15 psi is suggested for 91 octane fuel)
• BNR Cast iron turbine inlet adapter
• BNR Cast iron Turbine outlet adapter
• Multi-layer turbine inlet and outlet gaskets (for the BNR housing)
• 2 bolt aluminum compressor inlet adapter with O ring

Hardware included:

• 7 M10 1.5 stainless studs
• 7 M10 1.5 Stainless nuts
• 7 M10 2mm Stainless washers
• 1 M10 1.5 Allen head bolt (for turbine outlet adapter)
• 2 M8 1.25 Stainless 37MM length studs (for compressor inlet adapter)
• 2 M8 1.25 Stainless flanged nuts
• 60mm ID/2mm diameter O ring
• 1 Aluminum oil inlet adapter
• 1 M12 1.5 Stainless Banjo bolt (oil inlet to adapter)
• 6 M12 Copper washers (oil inlet)
• 6 M14 Copper washers (water inlet/outlet)
• Upgraded, stainless oil outlet tube with O rings (Comes standard on units purchased after 2/15/2024)