Accortec 100Gb S Qsfp28 Optical Transceiver Mpo 850Nm 100M

The Accortec 100Gb S QSFP28 Optical Transceiver is a high-density, ultra-fast optical solution designed for modern data centers and enterprise networks. In a compact QSFP28 package, it delivers 100Gb/s performance with full duplex operation, optimized thermal management, and built-in diagnostic capabilities to keep dense racks running smoothly under demanding workloads—from cloud infrastructure and hyperscale deployments to financial trading floors and HPC clusters. With broad interoperability and an emphasis on ease of deployment, this transceiver is poised to future-proof your upgrade path while maximizing port density and reliability in your network backbone.

• Ultra-fast 100 Gb/s data rate in a single QSFP28 module, enabling high-port-density deployments and scalable bandwidth growth without adding rack space or cabling complexity.
• MSA-compliant and broadly interoperable design that ensures plug-and-play deployment across leading network switches, servers, and storage platforms, minimizing integration friction in mixed-vendor environments.
• MPO 850 nm multimode optics using VCSEL technology for short-reach, high-bandwidth links, optimized for multimode fiber with robust performance up to 100 meters in typical data-center installations.
• Smart diagnostics and monitoring including real-time optical power, temperature, and link integrity data to simplify proactive maintenance, rapid troubleshooting, and SLA assurance.
• Efficient, space-saving design delivers dense port configurations in dense racks while prioritizing energy efficiency and reliable operation under heavy traffic and heat loads.

Technical Details of Accortec 100Gb/s QSFP28 Optical Transceiver

Note: Technical specifications are retrieved from the supplier's specifications database using UPC or SKU as reference. Actual numbers may vary by revision, SKU, or regional variant.

• Form factor: QSFP28 optical transceiver
• Data rate: 100 Gbps cabling per module (4 × 25 Gbps lanes internally, aggregate 100 Gbps)
• Wavelength: 850 nm (multimode optics)
• Fiber type: Multimode (OM3/OM4 commonly supported in data-center MMF deployments)
• Reach / distance: Optimized for short-reach links, typically up to 100 meters on appropriate MMF fiber
• Connector type: MPO/MPO interface for parallel MMF fibers
• Protocol / standard: Designed for 100GBASE-SR4 communications (hot-swappable QSFP28)
• Compliance: MSA-compliant with broad interoperability across major vendors
• Diagnostics: Built-in monitoring for optical power, temperature, and link status with digital diagnostics via vendor tools
• Power and thermal: Optimized thermal design to minimize heat buildup in dense racks; power consumption varies by revision and configuration
• Compatibility: Broad compatibility with switches, servers, and storage platforms that support QSFP28 100GBASE-SR4 interfaces

How to install Accortec 100Gb/s QSFP28 Optical Transceiver

• Prepare the device: Power down the switch or place the port in maintenance mode as required by your network policy. If your hardware supports hot-swapping, verify that the port is flagged as ready for a module exchange.
• Remove the existing transceiver: Carefully release the module latch on the QSFP28 port and slide the old module straight out. Avoid twisting or forcing the component to prevent damage to the receptacle or the port.
• Inspect and align: Inspect the port and connector area for debris or dust. Align the Accortec QSFP28 module with the slot so that the connector interface lines up cleanly with the port’s receptacle orientation.
• Insert and seat: Gently push the module into the port until it seats firmly and the latching mechanism engages. Do not force the module; if you feel resistance, remove and reinsert to ensure proper alignment and seating.
• Connect the fiber cables: Attach the appropriate MPO fiber harness with the correct fiber type (e.g., OM3/OM4) and MPO connectors. Ensure clean, undamaged connector ends and verify proper polarity and channel mapping as required by your topology. After seating, verify that the link status indicators illuminate as expected and perform a basic connectivity test.

Frequently asked questions

• What is the Accortec 100Gb QSFP28 transceiver best used for?

  The transceiver is designed for high-bandwidth data-center fabrics, enterprise backbones, and HPC clusters that require dense 100Gb/s interconnects. It uses a QSFP28 form factor with MPO connectors and 850 nm multimode optics for short-reach interconnects, making it ideal for SR4-style deployments in multi-mode fiber environments.

• What kind of fiber and reach does it support?

  It uses multimode fiber (typical MMF such as OM3/OM4) and supports short-reach links—commonly up to 100 meters depending on fiber quality and network conditions. The 850 nm VCSEL optics are optimized for SR-type, parallel fiber configurations using MPO connectors.

• Is this transceiver interoperable with different vendors?

  Yes. The Accortec 100Gb QSFP28 optical transceiver is MSA-compliant, designed for broad interoperability across leading switches, servers, and storage platforms. Always verify the exact SKU revision with your network device to confirm full compatibility and supported breakout or lane-mapping options.

• Do I need special cabling or cleaning procedures?

  Yes. Use clean, properly rated multimode fiber cables with MPO connectors. Follow standard fiber-cleaning practices and inspect connectors for+$ debris before mating. Proper handling minimizes insertion loss and preserves link integrity.

• What about installation impact and warranty?

  Installations should follow standard ESD precautions and vendor guidelines. The warranty terms vary by vendor and region; consult your supplier documentation for the exact warranty period and coverage on Accortec transceivers.