Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Rear Wheel Bearing Kit for Mitsubishi Lancer (1994-1996) - PQ905Vehicle Fitment & Part Details This rear wheel bearing kit is listed for the Mitsubishi Lancer V (CB4A) with OE reference MB 809 577. 30 mm inner diameter, 56 mm outer diameter, 48 mm width, and 43 tooth ABS ring. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN engine chassis information where variants exist. Key Details SKU PQ905 Component Wheel Bearing Kit Position Rear Primary Fitment Mitsubishi Lancer V
Vehicle Fitment & Part Details
This rear wheel bearing kit is listed for the Mitsubishi Lancer V (CB4A) with OE reference MB 809 577. 30 mm inner diameter, 56 mm outer diameter, 48 mm width, and 43-tooth ABS ring. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- PQ905
- Component
- Wheel Bearing Kit
- Position
- Rear
- Primary Fitment
- Mitsubishi Lancer V (CB4A) 4G92 Petrol 1.6 (1994-1996)
- Specs
- 30 mm ID, 56 mm OD, 137.5 mm flange OD, 48 mm width, 43-tooth ABS ring
OEM Reference Numbers
- Mitsubishi: MB 809 577, MB 844 919, MB 844 919 SK1, MR 131 774, MR 403 728, MR 403 728X
Product Specifications
| Specification | Value |
|---|---|
| Inner Diameter | 30 mm |
| Outer Diameter (bearing) | 56 mm |
| Outer Diameter (flange) | 137.5 mm |
| Width | 48 mm |
| ABS Ring Teeth | 43 |
Vehicle Fitment
| Model | Chassis | Variant | Engine Code | Power | Years |
|---|---|---|---|---|---|
| Lancer V | CB, CD, CE | 1.6 (CB4A) | 4G92 (SOHC 16V) | 66kW/90PS | 1994-1996 |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Installation / Use / Maintenance Tips
- Compare the new wheel bearing kit to the removed unit before installation to confirm inner and outer diameters, width, and ABS ring tooth count match.
- Clean the hub housing and mating surfaces before fitting the new bearing.
- Use new fasteners where specified and tighten to the vehicle manufacturer's torque values.
- After installation, check for abnormal noise, play, or ABS warning light activity during a test drive.
Common Questions
Will this rear wheel bearing kit fit my Mitsubishi Lancer?
This part (PQ905) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 903 reviews
Sort
Product Reviews
★★★★★ 2
My raptor GSP destroyed this dino toy
Color: Medium - Dilophosaurus, Color: Medium - Dilophosaurus
My dog ripped this toy apart faster than the trex did the lawyer in Jurassic Park. 2 hours! Arm was ripped off, stuffing pulled out methodically over the next to days. Now it is a gutless husk. The metor was kinder to the og dinos than my gsp was to this. Sorry Bite Force. Open to product sampling tho!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 4
My Hero pup is super happy with it
Color: Large - Billy the Beast Monster
I was super excited to order this and had waited some time to do so. I wanted Big Billy The Beast Monster in large Green, he’s an awesome looking guy. My Golden Retriever was all over me while I was up packaging Him and his tail was in helicopter mode. He was so excited to have it and carried it around the house everywhere we went, he’s laying on me with his head in my lap and Billy’s right next to him. Reason for buying it? Well he loves plushies but there are not many available out there that can stand up to this 80 pound chew monster so I have to keep him on harder stuff, 2 of which are the cheapest toy skull and crosses in orange and blue from a cheap outlet site but he loves them. Orange was first then when we pulled out the blue one he had a aha moment. Now with Billy he was on a whole new level of excitement, I’ve never seen him this excited over a toy, he can’t stop carrying it with him everywhere and showing it off to the other pups I have, there’s no growling or resource guarding but he definitely won’t want to share and that’s of because I always take away any plushies that he gets to because he is serious about chewing. This being made with Kevlar gave me hopes of longevity but he had the ears and the end of 1 hand chewed off in under 2 hours, am I disappointed…yea a little but he has gotten so much joy out of it that it’s made me really happy to have bought it anyway, see he’s my Service Dog so he spends a lot of time being so serious and working that he needs any outlet for spending energy possible and he’s so happy with it that it makes me happy. As I’m writing this he’s asleep with his head in my lap and Billy right next to him looking very tired and happy and that my friends is worth all the beans in the world.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Survives agressiveness
Color: Large - Billy the Beast Monster
This toy is absolutely for aggressive chewers,my yorkies usually have their stuffed animals torn apart within a day,been a week and not 1 rip! Very happy with it and worth the money!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Great except for one small flaw
Color: Regular - Beak, Color: Regular - Beak
Our dog likes to get at the juicy innards of every toy we buy him. We tried this one as it promised to be "bullet proof". It lasted about a week which in fairness is 6.5 days longer than most of the toys we buy last. He ripped off the wings which was to be expected and not an issue. It took him another 6 days to finally locate a weak point and break in. It appears that the tag is not made of kevlar but merely sewed on. I guess it would be better if they had just sewed it on top but they made it part of the overall structural integrity. This provided a small area of weakness which our dog located and proceeded to exploit. It's like having the death star but installing a small thermal exhaust port that allows for access to the very core of the station. Makes little sense. Overall I am pleased with the overall sturdiness but in the end this toy had a small design flaw that my dog was able to locate and exploit in his neverending quest to gain access to and eat polyester fiber stuffing
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2026
★★★★★ 5
STRONG AS A MONSTER (albeit a cute one)
Color: Large - Billy the Beast Monster, Color: Large - Billy the Beast Monster
My aggressive chewer ate the adorable monster's ear off on the first day, but who cares? The body of the monster has been indestructible so far (one week). My 7 month old pup cbews it for a good 10-15 minutes at a time several times per day. Great quality product and outlasting all the other toys I bought (which she destroyed in 10 minutes - even the ones rated "Level 4 toughness" from Walmart. I think it's hilarious in my photo that the monster's expression perfectly shows his disappointment about missing an ear, LOL.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
recommand products
Radiator Hose (Upper) Nissan Sentra 1.4, 1.6 (92-02), Sabre 1.4, 1.6 (92-02)
109.11
Radiator Hose (Upper) Toyota Hi-Lux 2200D, 2400D, 2800D (80-98), Stallion, Venture 2.4D (95-04)
120.40
Universal Radiator Hose 90° Bend 180Mm Leg In Dia 57Mm
339.70
Front Wheel Oil Seal Nissan Maxima 2.0, 3.0, 300Se (91-04), Primera 1.6, 2.0 (98-02)
144.05
Radiator Hose (Upper) Ford Cortina 3000 (80-84), Courier 3.0 V6 (86-00), Mazda B3000 V6 (86-96)
129.53