VPI Avenger Reference Turntable
SKU: 88231950006

VPI Avenger Reference Turntable

$22270.50 $24745.00
Save 10%
No.2 Bestseller on www.maison-nature-brenne.fr >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

VPI Avenger Reference TurntableVPI Avenger Reference The final and polished for of the VPI Avenger Reference. This model went through an evolution with the creation of our top of the line Titan turntable using the same concept of the rim drive motor assembly driving the magnetic platter. The magnets are machined into the platter at the center and do not interfere with the owners cartridge. Our methodology is the ultimate vibration filter for a high end system. The VPI Avenger

VPI Avenger Reference

The final and polished for of the VPI Avenger Reference. This model went through an evolution with the creation of our top-of-the-line Titan turntable using the same concept of the rim drive motor assembly driving the magnetic platter. The magnets are machined into the platter at the center and do not interfere with the owner’s cartridge. Our methodology is the ultimate vibration filter for a high-end system.

The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly. The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table. The corner posts connect to the cone stabilizers which sit in a machined Delrin/ball bearing isolation base reminiscent of the same used on the Prime turntable. Fully adjustable arm boards are made from 5/5” 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacturer's brand, and any length!

VPI Fatboy Gimbal 12-3D

Bearing Type: Full Gimbal Bearing

Pivot to spindle: 300 mm

Internal Wire: Nordost Reference Wire

Effective length: 313.0 mm

Effective mass: 12.5g.

Overhang: 13mm

Offset angle: 17.37 degrees

Average RMS distortion: 0.267%

Material: 3D Technology Consisting of but not limited to Epoxy resin and Delrin materials, copper, aluminum, and steel 

Product Notes: Adjustable Drop Counterweight, Azimuth side weights, VTA, and Limo Connection.

Available Upgrades:

  • Additional Tonearms

  • Additional Arm boards for third-party arms

  • Pneumatic Air Suspension feet

Resources, Awards, and Reviews ​

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 88231950006

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 1888 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Movie Buff
San Leandro, US
★★★★★ 5
It takes skill to mount and not have the leaning tower of Pisa
Size: 36in, Color: 4-layer
First, the product is beautiful! I purchased this one for a smaller wall location but realized it was more massive and commanding within a room - That ended up being a good thing as I decided to put it in my office where my L shaped desk, (a Vernal executive desk), being quite massive, was successfully offset by drawing the eye up to the wall behind the desk where I had this mounted - In essence, the room was now properly balanced with the large desk - One should also know it takes some skill to mount to the wall - It should be in studs - You have to use a balance or bubble level to first get the vertical pipes parallel to each other - Also, make sure both vertical pipe supports are symmetrically matching each other from one side to the other - If you mount one upside down the wood shelves won’t lay level - We also turned the pipe supports so that the shelves would be equal distant - If I recall, if they are turned the other direction , you end up with shelves that are not equal distant with 2 shelves ending up closer to each other than the remaining shelves. The shelving is very high quality and I was very, very pleased with the end result and how the whole room was balanced with the large desk in a smaller office space.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
T
Verified Purchase
That One Guy
Chelsea, US
★★★★★ 5
Solid shelves that look good!
Size: 36in, Color: 3-layer, Size: 36in, Color: 3-layer
Got these as a focal piece to my basement bar (added some cheap stick on LED strip lights behind it). I’m glad I ordered these! They are sturdy, shelves are solid wood, and the overall quality of the shelves is great. They were easy to install with provided hardware (although there isn’t much instruction in terms of mounting them, just putting them together), but it was simple enough to figure out with two people and a level (one holding, one making marks). Each pipe end has 4 screw holes, so expect to put 16 holes in your wall, but as shown in the photos the shelves can hold a good amount of weight. I recommend these for anyone looking to add the industrial look to your wall with a quality built shelf.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2023
D
Verified Purchase
david nespoli
Port Orchard, US
★★★★★ 5
VERY sturdy and almost foolproof
Size: 36in, Color: 3-layer, Size: 36in, Color: 3-layer
This kit is made of real wooden planks, and metal pipes and fittings. Installation is simple- assemble each end of the kit, hold it up to the wall using a magnetic level, mark the four holes for each mounting piece, then repeat with the other side. You'll need a tape measure to make sure that the ends aren't too close together or too far apart, and measure from the ceiling or floor to ensure a level surface. You will want a second set of hands for most of the install process. This kit comes with good molly bolts and strong screws that match the finish of the metal hardware. Make sure that each side of the unit is oriented the same way, as I had to flip one side after neglecting to do so at first. Retaining brackets and wood screws are included for securing each shelf to the metal frame. A power drill makes this part very easy, and can be done mostly solo as the brackets can be pinched to clip onto the frame while you attach the screws. Once installed, this unit is VERY sturdy. There is no play or wobbling when testing the attachment to the wall. If there is, tighten your screws and make sure that the fittings to the wall mounts are hand-tight. These shelves can handle heavy kitchen staples and books with no problem. It is a tier more expensive than most Ikea-style shelving, but that's worth it for the confidence that my dry goods are safely stored in a convenient place.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 10, 2023
D
Verified Purchase
David H
Dallas, US
★★★★★ 4
Great shelving unit
Size: 48in, Color: 4-layer
Great looking shelving unit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
R
Verified Purchase
r atienza
San Leandro, US
★★★★★ 5
Nice Product
Size: 48in, Color: 4-layer
The TP-Link Omada 5-Port Gigabit Easy Managed Switch offers stable performance and straightforward setup. It delivers consistent connectivity and solid value for the price. A dependable choice for a well-organized network.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026

recommand products

Stainless Bros 3.0in x 17.0in OAL SS304 Muffler - Polished
189.99
FANCY MALBARI COTTON SAREE
499.00
FANCY MALBARI COTTON SAREE
499.00
ST Coilover Kit 06-09 Volkswagen Golf (MKV) GTI (Incl DSG) / 05-10 Volkswagen Jetta MKVI
545.00
FANCY DOLA SILK SAREE
483.00