
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
For Your Every Summer RSVP, with Code: SUMMER15
Description
Victory Kingpin / Highball / Judge 6" Extended Hard Saddlebags Out & Down Bags LED Rear Fender Dual Cut OutVictory Kingpin, also fits Highball and Judge Extended 6" Stretched Saddlebags " Out & Down", and Rear LED Fender Fiberglass Dual Cut Outs. lids This is a bolt on Kit using your original factory holes. Fits all Kingpin years. LED Tail Lights factory recessed into the fender with turn signals, brake & parking lights, this package includes the fender with LED's as pictured. This is a 100% fiberglass unit made here in the USA. This is not a cheap Chinese
Victory Kingpin, also fits Highball and Judge Extended 6" Stretched Saddlebags " Out & Down", and Rear LED Fender - Fiberglass - Dual Cut Outs. lids This is a bolt on Kit using your original factory holes. Fits all Kingpin years. LED Tail Lights factory recessed into the fender with turn signals, brake & parking lights, this package includes the fender with LED's as pictured. This is a 100% fiberglass unit made here in the USA. This is not a cheap Chinese imitation unit, these are the thick, heavy duty units made by us and that will survive through the worst of the weathers ( now i would not recommend putting it through a tornado or hurricane) and thousands of miles later on your Harley. Get the good stuff here, made by American Harley riders, we love our Harley's and we know you do too, we know the best and only want the best, so should you. These are not the Arlen Ness down-n-out bags and we are in no way affilated with them. Our products are hand made and custom designed by us only, we don't know and can't say the same about the Arlen Ness down and out saddlebags. You will need to sand, prep, minor filler, mockup, primer & paint before installing as these are unfinished. All items pictured are included in this listing. These do not include hardware. Stock Harley hardware will fit. Don't buy those cheap abs/plastic units that crack with vibration and break with the smallest mishap, you won't be able to fix them if you lay your bike down. These units are made out of hand laid fiberglass, they are thick and durable and forgiving in case of an accident or incident. The listings is for 1 set only and does not include the bike! Get your Harley looking like a million bux with this saddlebag/fender kit! . All Items are made in high quality hand laid fiberglass, these are not mass produced cheap and flimsy units, they are thick and better quality than factory.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 984 reviews
Sort
Product Reviews
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial.
These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings.
The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure.
In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily.
The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads.
The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top.
Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid.
The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece.
Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
recommand products
KennelMaster Retractable Leash with LED Night Light
22.99
Kink 24mm Pillar Cranks
199.99
Club Car DS 1/4-28 Ball Joint (Years 1981-Up)
29.48
INVADER ZIM Title Logo Full Color Pink/Green Seatbelt Belt - Invader Zim GIR Face and Flames Black/Green Webbing
29.95
Hand Truck, Heavy-Duty, Black, 1,000-Lb. Capacity
104.00